Wacker Neuson RC70 User Manual

Maintenance
Chassis/safety devices
128
BA RC50_RC70 en 00
4.01.03 Checking that the parking brake is working properly
3
1
2
Checking the parking brake when the machine is stationary
Requirement: The drive lever is engaged in position P.
Start the diesel engine.
Engage the working gear [1].
Move the drive lever [3] to position 0.
Apply the parking brake: Press and hold the parking brake switch [2].
Briefly push the drive lever [3] forwards.
a
The parking brake is working properly if the travel drive is disabled
when the parking brake is applied.
After the check: Release the parking brake [2] and return the drive
lever [3] to position P.
a
Machine is ready to start.
NOTE
If the parking brake is worn to such an extent that driving off
is possible even when the switch [2] is pressed, the parking
brake must be inspected or replaced. The machine must not be
operated until this work has been carried out.
Request assistance from customer service!
4.01.04 Checking that the seat contact switch is working properly
2
1

Wacker Neuson RC70 Specifications

General

Brand	Wacker Neuson
Model	RC70
Category	Trash Compactor
Language	English