Auxiliary equipment
Dozer blade
198
BA RC50_RC70 en 00
6.05.03 Operation
Activating the floating position
Press the button [3].
a
Floating position active.
a
The dozer blade [5] then follows the irregularities of the ground.
a
The indicator LED [4] lights up.
NOTE
If the floating position is activated with the dozer blade
raised, then the dozer blade lowers to the ground and
remains enabled.
Deactivating the floating position
Press button [1] or [2].
a
The floating position is deactivated.
a
The indicator blade [5] then does not follow the irregularities of the
ground.
a
The indicator LED [4] is off.
Lower the dozer blade
Press the button [1] on the drive lever until the desired position is
reached.
a
The dozer blade [5] is lowered.
Raise the dozer blade
Press the button [2] on the drive lever until the desired position is
reached.
a
The dozer blade [5] rises from the ground.
NOTE
The position of the dozer blade relative to the structure can
be judged from the position indicator [6].