Auxiliary equipment
Rotating beacon
192
BA RC50_RC70 en 00
6.02.05 Maintenance
WARNING
Work above floor level!
Injury caused by falling.
■
Do not perform any maintenance or repair work above ground level
unless using a stable ladder or a maintenance scaffold.
■
To reach the maintenance points on the machine, use the steps
indicated. Do not step on any other machine element or add-on
part.
NOTE
Dust or sand can impair the function of the rotating beacon.
Cleaning
Use a sponge and soap water to clean the rotating beacon.
Do not clean the rotating beacon with a water jet or high-pressure
cleaner.
Maintenance
Spray electrical contacts using a contact spray.
To Next Page
Loading...
Need help?
General
