Maintenance
Steering system
156
BA RC50_RC70 en 00
4.07 Steering system
WARNING
Uncontrolled movements!
Serious injuries or death caused by unexpected steering movements.
■
Perform work on the steering system with the engine at rest and
the electrical system switched off.
■
On machines with safety strut, apply the safety strut before
maintenance work.
■
To avoid any unintended engine start by any third person: affix
a warning notice at the driver's position indicating that work is in
progress on the machine.
4.07.01 Lubricating the articulated joint bearings
" Only lubricants with this symbol are permitted ("Technical data",
page 160 onwards).
Switch off diesel engine and remove ignition key.
Apply the articulated frame steering blocking.
Grease lubricating nipple [1].
4.07.02 Lubricating the steering cylinder pins
" Only lubricants with this symbol are permitted ("Technical data",
page 160 onwards).
To Next Page
Loading...