Operation
Driving
BA RC50_RC70 en 00
89
If the driver fails to react,
a
the machine will be braked until it stops after a total of 3 seconds,
and the working functions will be set to off.
a
The diesel engine continues running.
Braking is not initiated if the driver returns to his seat within 2 seconds of
leaving it.
If the machine is braked by the safety switch, the machine has to be
returned to its home position before operation .
Bring the machine into the home position - drive on after the
delayed braking.
Prerequisites:
■
Machine at a standstill, after the delayed braking.
■
Driver sitting on the seat again.
■
Diesel engine is running.
Move drive lever in position 0.
a
The work functions are active again.
3.16.02 Adjusting the engine speed
The switch [1] is used to control the speed of the diesel engine between
idling and the maximum speed.
■
Push the switch down: MIN – idling speed
■
Neutral position: ECO – 2/3 of maximum speed
■
Push the switch up: MAX – maximum speed
NOTE
The vibration frequency is coupled to the engine speed. The
adjustment of the engine speed will elements in the vibration
frequency (see Technical Data).
To Next Page
Loading...
Need help?
General
