Operation
Driving
90
BA RC50_RC70 en 00
3.16.03 Gearshift
WARNING
Excessive speed!
Risk of serious injuries due to machine behaviour at excessive speeds.
■
Use transportation gear only to manoeuvre on paved roads.
■
Drive longer slopes or inclines at reduced speed (working gear).
■
Work may only be performed in the working gear.
The machine has a working gear and a transportation gear. The driving
speed is infinitely variable in both ranges, depending on the selected
engine speed, and can be adjusted using the drive lever.
Working gear
■
For performing all work with the machine.
Some functions are only available when the working gear is engaged
(vibration/oscillation, dozer blade).
■
For driving on steeper slopes or inclines.
Transportation gear
■
For manoeuvring the machine on paved roads.
Selecting a gear
NOTE
The switchover is only enabled once the drive lever is engaged
in position P. Switching whilst driving is not possible.
The switch [1] is in position I.
a
Working gear is selected.
The switch [1] is in position II.
a
Transportation gear is selected.
a
The switch [1] lights up.