Operation
Operating doors and windows
68
BA RC50_RC70 en 00
3.05 Operating doors and windows
CAUTION
Projecting cab doors or windows!
Injuries caused by impacts and crushing, as well as material damage
caused by cab doors or windows that are not locked.
■
Before opening cab doors or windows, make sure that no persons
or objects are in the danger zone of the machine.
■
Keep the cab doors closed while driving and operating the
machine. (at split cab door: lower door halves).
■
Keep the windows locked in a completely closed or completely
open position while driving and operating the machine. (Exception:
ventilation position).
■
Use the 90° position of the cabin door and window only to climb up
or down the machine.
CAUTION
Force exerted by gas-pressure spring!
Injuries caused by impacts with fast moving cab doors or windows.
■
When opening and closing cab doors and windows, hold them
against the forces exerted by gas-pressure springs and their dead
weight.
NOTE
Door panes that can be opened, must always be locked
against falling down. If your cabin door is split, the lower half
door must be closed and latched in place in the lock while
driving.
3.05.01 Opening and closing the cab door
The door of the operator's cab is locked by a latch lock. Elements [1] or
[2] only have to be actuated in order to open the door. The door is locked
by pressing/pulling it into the lock.
To Next Page
Loading...
Need help?
General
