Preface
Danger zone
32
BA RC50_RC70 en 00
1.10 Danger zone
NOTE
The machine's danger zone is divided into two sub-zones:
"inactive" and "moving".
NOTE
There are other danger zones when the machine is loaded by
crane and transported. Also observe the operating manuals
and instructions for the loading and transporting machines.
"Inactive" zone
With the machine stationary and the diesel engine switched off, the
area 1 metre around the machine is defined as the danger zone. Only
operating personnel are allowed to enter the danger zone.
"Moving" zone
For a moving machine, the danger zone is defined as follows:
13 metres In front of and behind the machine
3 metres To the left and right of the machine
Make sure there is nobody in the danger zone during compacting work
and transport operations.
To Next Page
Loading...
Need help?
General
