Preface
Type plate
BA RC50_RC70 en 00
25
ROPS/FOPS type plate
The ROPS (cab, roll-over bar) and/or FOPS (falling-object protective
structure) approved for this machine by the manufacturer are/is identified
by a type plate that is attached to the cab/roll-over bar ("Control stand",
page 42).
[1] Series/type (part of the VIN/
PIN)
[2] Cab/ROPS identification
number 1
[3] Cab/ROPS identification
number 2
[4] Cab/ROPS serial number (if
available) 1
[5] Cab/ROPS serial number (if
available) 2
[6] FOPS identification number (if
installed)
[7] Year of manufacture [8] Tested up to the maximum
operating weight
To Next Page
Loading...