Wacker Neuson RD18 User Manual

Maintenance
Transmission
146
BA RD18 en 01
Folding scraper
2
2
1 1 2 3
3
Before carrying out any work on the scrapers:
Safely park the machine and secure it against rolling away.
Switch off the diesel engine and remove the ignition key.
Changing the scraper
Turn the locking lever [3] to position 0.
Move the scraper [1] away.
Loosen the clamp connection [2].
Replace the scraper [1] with a new one.
Tighten the clamp connection [2].
4.06.04 Adjusting/replacing the tyre scraper
NOTE
If they are worn-out to such an extent that sticking dirt is not
removed from the roller drums/tyres during work any longer,
the scrapers must be readjusted or replaced.
NOTE
Fit the new scrapers such that the screws in the clamp
connection are located in the lowermost position of the
elongated holes.
3
2 1 2

Wacker Neuson RD18 Specifications

General

Brand	Wacker Neuson
Model	RD18
Category	Construction Equipment
Language	English