Operation
Stopping the machine in an emergency – EMERGENCY STOP
86
BA RD18 en 01
3.15 Stopping the machine in an emergency – EMERGENCY
STOP
WARNING
Full braking!
Stopping the machine suddenly can lead to serious injuries or death.
■
Only use the EMERGENCY STOP in the event of danger.
■
Do not use the EMERGENCY STOP as the service brake.
NOTICE
Incorrect performance of an EMERGENCY STOP!
Material damage to electronic or mechanical components of the
machine as a result of incorrect performance of an EMERGENCY
STOP.
■
Always use the EMERGENCY STOP function to switch off the
machine in the event of danger.
Performing an EMERGENCY STOP in the event of danger
NOTE
In an emergency, the EMERGENCY STOP brings the machine
to a controlled stop and switches it off.
Using the EMERGENCY STOP is the only way to guarantee
that all operating functions will be disabled immediately without
causing any further danger to driver, the machine or the
environment.
Press down hard on the EMERGENCY STOP button [1].
a
The machine will disable all operating functions automatically and
■
stop the travel drive immediately.
■
switch the diesel engine off.
■
apply the brakes.
Restarting the machine after an EMERGENCY STOP
Switch off the electrical system using the ignition key.
Engage the drive lever in position 0.
To Next Page
Loading...
