Description
Information on the machine
BA RD18 en 01
33
2 DESCRIPTION
2.00 Information on the machine
NOTE
When working at the machine please always adhere to the
instructions given in your Safety instructions!
2.00.01 Technical characteristics
Travel drive
Hydrostatic all-wheel drive
■
infinitely variable
■
Single lever operation
Dynamic compaction system
Direct hydrostatic drive
Steering
Hydrostatic assisted steering via three-point articulation
■
Large steering lock to both sides
■
Pendulum compensation upwards and downwards
Track offset
Mechanical track offset
■
Rigid
■
Track offset to the right
■
No track offset for combination rollers
Service brake
During operation, the machine is braked by the hydrostatic travel drive.
■
Wear-free brakes
Parking brake
Spring-operated brake acting upon each hydro motor of the travel drive.
■
Manual and automatic
EMERGENCY STOP
Machine is braked with spring-operated brakes and hydrostatic travel
drive.
Water sprinkling
Pressure sprinkling
■
Manual actuation
■
Automatic interval system
Additive sprinkling
Pressure sprinkling
■
Manual actuation
Electrical system
Operating voltage 12 V
Drive system
Diesel engine
To Next Page