Maintenance
Transmission
BA RD18 en 01
149
Switch off diesel engine and remove ignition key.
Fasten filling hose to the valve [1] and fill the tyre till it reaches the
specified air pressure ("Technical data", page 169).
4.06.08 Changing the tyres
WARNING
Tipping over the machine!
Serious injuries or death through the machine tipping over sideways
because of a shift in the center of gravity.
■
On one axle, only mount and use tyres that are the same type and
have the same design, profile and diameter.
■
Always set the tyre pressure the same for the tyres of the same
axle.
NOTICE
Increased material wear!
Material damage through increased wear on tyres, running gear and
drive parts as a result of a combination of different tyres on each axle.
■
On one axle, only mount and use tyres that are the same type and
have the same design, profile and diameter.
■
Always set the tyre pressure the same for the tyres of the same
axle.
Preparation
NOTE
When using a jack, do not place metal on metal.
Put machine on a safe surface (even, capable of bearing, horizontal)
and secure against rolling away
Switch off diesel engine and remove ignition key.
Have hoisting gear ready that is appropriate for the weight of the
machine and wheels.
Lift the machine until the wheels leave the ground:
To Next Page
Loading...
Need help?
General
