Operation
Switching the signal horn and lighting on and off
BA RD18 en 01
77
3.11 Switching the signal horn and lighting on and off
NOTE
When the lights are set to on for a longer period of time
although the engine is stopped, the battery will be discharged
quickly.
Actuating signal horn
Requirement: Electrical system is ON.
Press the signal horn switch [3].
a
A short acoustic signal sounds when a fault is detected.
Switching the hazard warning lights on and off
Press switch [5].
a
Switch [5] flashes: The hazard warning light is switched on.
Press the switch [5] again.
a
Switch [5] is not lit up: The hazard warning light is switched off.
Signalling left/right
Prerequisite: The electrical system is ON.
Press switch [1] for signalling left.
Press switch [2] for signalling right.
a
The relevant switch [1/2] flashes: The turn signal light is switched on.
Press the switch [1/2] again.
a
Switch [1/2] is not lit up: The turn signal light is switched off.
NOTE
If the light bulb in one of the direction indicators is defective,
the indicator lights/switches flash rapidly. To guarantee road
safety, the defective light bulb must be replaced.
Switching the parking light on and off
Prerequisite: The electrical system is OFF.
Press switch [7].
a
Switch [7] lights up: The parking light is switched on.
To Next Page
Loading...
Need help?
General
