Operation
Track offset
96
BA RD18 en 01
3.20 Track offset
Compacting work along kerbs or similar borders cannot be carried out, or
only in a limited way, without track movement of the drums.
A track adjustment especially developed for this problem enables the
machine to drive very precisely along such problem areas.
"Clear Side" design
The drums are suspended on a single side, and present a lateral offset
with regard to one another. No component of the machine protrudes
beyond the working width. This makes it possible to compact right up to
the edge of e.g. kerbs or walls.
Due to the track offset, the machine always remains manoeuvrable since
a steering lock is also always possible on the lateral limiting systems.
NOTE
With the "inline" version of the machine (no track offset), it is
not possible to compact right to the edge.
To Next Page
Loading...
Need help?
General
