Operation
Functional tests before starting work
BA RD18 en 01
65
3.03 Functional tests before starting work
Check the following to ensure safe operation of the machine:
Check Refer to
Can the machine be accessed safely? page 66
Has the driver's seat been adjusted? page 68
Has the seat belt been tested? page 71
Has the position of the seat been adjusted? page 68
Has the voltage supply been activated via the battery isolation switch? page 75
Are the turn signal and hazard warning lights working? page 77
Is the signal horn working? page 77
Are the lights working? page 77
Is the back-up alarm working? page 83
Is the rotating beacon working? page 77
Is the parking brake working? page 126
Is the EMERGENCY STOP working? page 125
Has the fuel tank fill level been checked? page 102
Has the coolant fill level been checked? page 136
Has the hydraulic oil tank fill level been checked? page 139
Has the water tank fill level been checked? page 154
Has the additive tank fill level been checked? page 158
Has the air pressure in the tyres been checked? page 148
Have the scrapers been checked? page 145
Has the engine hood been closed and locked? page 74
To Next Page
Loading...
Need help?
General
