Operation
Loading and transporting
64
BA RD18 en 01
Specific safety instructions
■
Slowly drive the machine up/down with the speed set to 2/3 and the
drive lever at the 1/4 position.
■
Do not exceed the maximum ramp slope (28.5 %, approx. 16°).
■
Secure the clamping devices.
■
On rubber wheeled rollers with tyre filling system, the tyre filling
system must be set to 0.6 MPa (6 bar, 87 psi).
■
Check the inflation pressure at least every 24 hours and, if refill the
air, if necessary (see Technical data).
Miscellaneous
■
Lock the seat console in position
■
Put down the add-on equipment
To Next Page
Loading...
