Description
General view of machine
BA RD18 en 01
41
10 hrs; daily maintenance
The activities that are shown on the sign must be carried out on a daily
basis before starting up the machine – at least every 10 hours.
The check and maintenance work that is to be carried out may deviate
from what is shown, depending on the model and equipment of the
machine.
This is not an exhaustive representation of the activities. The sections
"Functional checks before starting work" and "Maintenance overview" in
this operating manual are binding and must be followed.
NOTE
The sign is for informational purposes only. It should not and
cannot replace instructions/training from the operator on how to
handle the machine.
Check:
■
Hydraulic oil fill level (top up if required)
■
Coolant fill level (top up if required)
■
Engine oil fill level (top up if required)
■
Dust valve at the air filter (clean if required)
■
Tyre pressure (correct if required)
Clean:
■
Filter for the water-sprinkling system
■
Sprinkler nozzles
■
Drain the water sump on the water separator
Functional check in the case of an existing ma-
chine:
■
Seat contact switch
■
EMERGENCY STOP
■
Safety switch for multifunction armrest
■
Parking brake
To Next Page
Loading...
Need help?
General
