Operation
Adjusting the driver's seat
BA RD18 en 01
69
Seat adjustment forward/backward
Lift the lever [3].
Slide the seat forward or backward to reach the desired position.
Release the lever [3] and let the seat pedestal snap in place.
Seat heating (option)
To allow heating the seat, the driver's seat for version B is equipped with
an optional seat heater. The switch is located on the right-hand side of
the steering column.
Press switch [5].
a
The seat heater is on.
Press the switch [5] again.
a
The seat heater is off.
Driver's seat, version B
Setting driver's weight
There is damping built into the driver's seat that compensates for shock-
like machine movements. For this damping to function optimally, the seat
must be adjust to the weight of the driver.
NOTE
Only adjust the weight setting when the seat is unloaded.
Turn the lever into the corresponding position:
■
Light driver's weight (approx. 50 – 70 kg) – position I
■
Medium driver's weight (approx. 70 – 100 kg) – position II
■
Heavy driver's weight (approx. 100 – 130 kg) – position III
Setting the slope of the backrest
Turn the hand wheel [2] in + (plus) direction.
a
The seat back is inclining backwards.
Turn the hand wheel [2] in – (minus) direction.
a
The seat back is inclining forward.
To Next Page
Loading...
Need help?
General
