Operating manual Spray wall Basic 8000
9 Inspections in Accordance with DIN EN 50177: 2009
Order number 3305595 | Edition 07/2022 31
9 INSPECTIONS IN ACCORDANCE WITH DIN EN 50177: 2009
If the system is used for electrostatic coating with ignitable coating powders, the test must
be performed in accordance with EN50177:2009+A1:2012 according to the following
overview table [832].
9.1 ABBREVIATIONS
ER Employer FT Function test
SP Skilled person ME Measurement
FPE Fire protection engineer SI Standard inspection
QEW Electrician VI Visual inspection
MFR Manufacturer CM Continuous monitoring
TP Trained person TI Technical inspection