Operating manual Spray wall Basic 8000
3 Identification
Order number 3305595 | Edition 07/2022 9
3 IDENTIFICATION
3.1 CE IDENTIFICATION
The spray wall is not approved for operation in a potentially explosive atmosphere.
Device type: Basic 8000
Manufacturer: Wagner International AG
9450 Altstätten
Switzerland
3.2 TYPE PLATE
Wagner International AG
9450 Altstätten
Switzerland
Designed by WAGNER Switzerland, assembled by WAGNER Germany
Bezeichnung der Serie oder des Typs
Designation of the series or type
Baujahr/Year of manufacture
Seriennummer/Serial number
Bestimmungsgemässe Verwendung
Intended use
Bezeichnung der Maschine
Designation of the machine
Betriebsart/Operating mode
Installierte Leistung
Installed power
Maximale Grösse der Werkstücke
Maximum size of workpieces
Erforderlicher Mindest-Abluftvolumenstrom
bei 20 °C
Required minimum extract air volume flow
at 20 °C
Maximale Menge des Beschichtungspulvers
(g/min) bei UEG
Maximum quantity of coating powder
introduced (g/min) at LEL
Spannung/Voltage
Frequenz/Frequency
Gesamte Öffnungsfläche
Total opening area
Druckluftversorgung
Compressed air supply
Druckluftbedarf
Compressed air requirements
Basic 8000
Sprühwand für elektrostatische
Pulverbeschichtung
Spray wall for electrostatic
powder coating
Manuelle Beschichtung durch
Bedienperson vor der Sprühwand
Manual coating by operator in front
of the spray wall
6 kW
30 % der gesamten Öffnungsfläche
(1.3 m²)
30 % of total opening area (1.3 m²)
8000 m³/h
maximal 1330 g/min bei UEG 20 g/m³
maximum 1330 g/min at LEL 20 g/m³
230V/400 V
50 Hz
4.4 m²
6.5–8.0 bar
30 Nm³/h
1
2
3
4
5
6
7
9
10
8
11
12
13
14
15
16
P_05376
1 Manufacturer, CE/UKCA identification 9 Maximum size of work pieces
2 Designation of the machine 10 Minimum exhaust air volume flow
3 Designation of the series or type 11 Maximum powder quantity
4 Year of manufacture 12 Voltage
5 Serial number 13 Frequency
6 Using in Accordance with the Instruc-
tions
14 Total opening area
7 Operating mode 15 Compressed air supply
8 Installed power 16 Air consumption