27
OPERATING MANUAL
VERSION 12/2015
ORDER NUMBER DOC2333558
6 ASSEMBLY AND COMMISSIONING
6.1 TRAINING ASSEMBLY/COMMISSIONING STAFF
A skilled person must check to ensure that the device is in a reliable state after it is installed
and before commissioning.
The assembly and commissioning sta must have the technical skills to safely
commission the device.
When assembling, commissioning and carrying out all work, read and follow the
operating manuals and safety regulations for the additionally required system
components.
Inclined ground!
Risk of accidents if the device rolls away/falls.
Position the trolley with the piston pump horizontally.
If the surface is inclined, position the feet of the trolley towards
the gradient.
Secure the trolley.
WARNING
B_04065
6.3 TRANSPORTATION
The pump can be moved on a trolley or manually without lifting
equipment.
6.2 STORAGE AND INSTALLATION CONDITIONS
Until the point of assembly, the device must be stored in a dry location, free from vibrations
and with a minimum of dust. The device must be stored in closed rooms. For speci cations
on temperatures and relative humidity, see Technical Data.
Long-term storage: Thoroughly clean the pump, if a long-term decommissioning is
planned. See Chapter "Cleaning". For recommissioning, proceed according to following
chapters.
To Next Page
Loading...
Need help?
General
