12
W&T Quickstart
Step 5: Installing the W&T USB Port Redirector
The W&T USB Port Redirector implemented as a Windows core
driver makes a virtual USB host controller available. Install it on
a Windows XP or higher machine using the W&T product CD
included in the scope of delivery. Login as Administrator or
with administrator rights is required for installation.
After starting the W&T product CD, the link Search is located
on the USB-Server tab. In the following dialog select the 32- or
64-bit version as required by your system and then click on the
Install/Uninstall button. In addition to the actual core driver the
associated configuration and management tool is also installed
in the new program group W&T USB Port Redirector.
1
To make it possible to publish updates to the W&T USB
Redirector as soon as possible, the driver is not WHQL
certified. To successfully finish the installation the
corresponding message from the Windows logo test must be
acknowledged with Continue installation.
1
Detailed information about installing is found in the W&T
USB Port Redirector section.
To Next Page
