45
Subject to errors and modifications
W&T The W&T USB Port Redirector
5.3.1 Automatic inventory list creation
Here the local subnet automatically searches for W&T USB-
Serverns and USB devices connected to them. The inventorizing
is done in two phases, whereby first the W&T USB-Servers are
found using a UDP broadcast (port 8513). Then any connected
USB devices are queried using a TCP connection to the
UsbServerPort (factory setting 32032). If the UsbServerPort is
reconfigured via Web Based Management in the USB-Server, the
specification TCP-Port must be changed accordingly in the
Properties dialog box.
The search is carried out automatically each time the
configuration tool is started and when creating a new list using
the File r New function.
A manual search can be performed at any time by clicking the
Scan
button.
1
Automatic inventorizing is done using UDP port 8513
and the TCP UsbServerPort configured in the USB-Server
(factory setting = 32032). Any firewall or security software
installed in the respective computer must permit this
communication.
5.3.2 Manual entries in the configuration list
Remote USB-Servers connected through routers or gateways
cannot be detected by the automatic scan function of the
configuration tool. The entry in the inventory list must in such
cases be made manually.
To Next Page
Loading...