55
Subject to errors and modifications
W&T Web-Based-Management
6.4 WBM - Network basic parameters
Config r Device r Basic Settings r Network in the navigation
tree takes you to the Web page with the network-side basic
parameters.
1
Saving changes made here closes any connections from
PCs to connected USB devices. To prevent data loss, we
recommend any users listed on the homepage of the USB-Server
to be previously notified.
In DHCP mode the USB-Server obtains the network-side basic
parameters IP address, subnet mask and gateway address from
a DHCP server located in a network. In Static mode these
parameters are determined statically using the following entry
fields. Detailed information about both modes can be found in
the sections DHCP Mode and Static Mode.
To Next Page
Loading...
