56
W&T Web-Based-Management
For entering the IP address when DHCP is disabled.
For entering the subnet mask for the respective network when
DHCP is disabled.
For entering the gateway for the respective network when DHCP
is disabled.
1
Valid values for IP address, subnet mask and gateway
canbe obtained from your network administrator. If you
assign the IP address yourself, be sure that there are no address
conflicts with other devices.
TCP port number (decimal) under which the Web-Based-Ma-
nagement of the USB-Server can be reached. The factory setting
is for HTTP standard port 80. When using other port numbers,
these must be separated by a colon with opening the WBM in
the address line of the browser (e.g. http://10.10.1.1:1234)
TCP port number (decimal) under which the W&T USB Port
Redirector communicates with the connected USB devices.
When using a different port number, it must be entered the
same in the Properties of the USB-Server in the configuration
tool (see Inventory List for additional information).
1
The TCP port used here must be permitted in any
firewallsbetween the USB-Server and the USB Port
Redirector. The USB Port Redirector acts here as a client and is
thereby the connection partner.
To Next Page
Loading...
