14
W&T Quickstart
• Permanently
The USB device is permanently logged on in the system. This
means that after a computer restart the connection is
automatically restored and the USB device logged on in the
system.
Like when plugging in to a local USB port, clicking the OK
button adds the USB device to the WIndows plug&play system.
The device-specific driver installation than then be used as if it
were connected to a local USB port on the computer.
If the Windows computer and the W&T USB-Server are not
located in the same subnet, no automatic inventorying can take
place. The W&T USB-Server must first be manually added using
Device r Add.
1
Detailed information on the function of the W&T USB Port
Redirector is found in the W&T USB Port Redirector
section.
To Next Page
