W&T
© 11/2009 by Wiesemann und Theis GmbH
Microsoft, MS-DOS, Windows, Winsock and Visual Basic
are registered trademarks of Microsoft Corporation
Subject to errors and changes:
Since mistakes are always possible, all of the information in this
manual should be applied with discretion. Please let us know of
any errors or unclear instructions so that we can correct them
as quickly as possible.
Perform work on and with W&T products only as described here
and after you have read and understood the manual in full.
Unauthorized actions may create hazardous conditions. We are
not liable for the consequences of unauthorized actions. When
in doubt, please consult with us or your dealer.
To Next Page
Loading...
