53
Subject to errors and modifications
W&T Web-Based-Management
6.2.2 Logout
Quit a configuration session by using the Logout page of the
USB-Server.
1
All functions except for Cancel cause any connections
from PCs to connected USB devices to be closed. To
prevent data loss, we recommend any users listed on the
homepage of the USB-Server to be previously notified.
... closes the session and saves all changes made to the non-
volatile memory of the USB-Server. If the changes require
restarting the device, this is automatically performed.
... closes the session and cancels all changes.
... closes the session and reverts to the settings of the USB-
Server. All settings which are different from the default values
including the network parameters are lost.
1
In environments with static network parameters (no
DHCP)assigning the new IP address can be done only
from a workstation which is located in the same subnet as the
USB-Server.
...closes the session without saving any changes and restarts
the USB-Server.
To Next Page
Loading...
