63
Subject to errors and modifications
W&T Appendix
New firmware is sent to the USB-Server using the WuTility
management tool. In the inventory list highlight the desired
USB-Server and then click on the Firmware button.
In the following dialog box you select only the firmware file you
want to send (*.uhd) and then click on the Continue button. Af-
ter successful sending the USB-Server automatically performs a
restart and is then ready to use.
1
Interrupting the update process may result in failure of
thedevice. Therefore you should verify that the supply
voltage is stable and the network connection reliable before
updating.
To Next Page
Loading...
