RS232/485 TO WIFI POE ETH (B) User Manual
www.waveshare.com
Figure Access point settings
4.1.5 WIRELESS TERMINAL SETTINGS PAGE
Wireless terminal interface, also known as STA interface. RS232/485 TO WIFI POE ETH (B) can be
connected to other wireless networks through the STA interface, as shown in the following figure:
The settings on this page include two tables. The top one is the wireless settings for STA,
including the SSID of the AP to be connected, security settings, etc. The following table shows the
network connection mode settings, including DHCP and static connection mode.
To Next Page
Loading...