BlueCool S-Series 7
5 Installation
5.1 General
Note
To ensure proper operation, the following must be
observed:
■
All components must be positioned and installed
in accordance with their installation instructions.
5.2 Installation location
DANGER OF FIRE AND EXPLOSION
Danger of ship exploding.
Do not install BlueCool S-Series in rooms with
highly flammable liquids or gases.
BlueCool S-Series air-conditioning systems are generally installed
in the living area.
5.2.1 Requirements for the installation location:
■
Sufficient space must be available to ensure access to the con-
densed-water drains and electrical connections.
See Chapter “13 Technical Data” on page 30 and Chapter
“13.2 Dimensions and minimum distances Type S6 - S20” on
page 32 or Chapter “13.3 Dimensions and minimum distanc-
es Type S27” on page 33.
■
The system must be accessible for service and maintenance pur-
poses.
■
The BlueCool S-Series must be mounted on an even, horizontal
surface.
■
Since operation of the BlueCool S-Series leads to condensation,
two drain lines must be provided on the condensed-water tray.
■
Do not directly expose the self-contained air-conditioning unit
to splash water or overwash.
■
The BlueCool S-Series self-contained air-conditioning units are
approved for a maximum ambient temperature of 40 °C
■
To avoid local ambient temperatures in excess of 40 °C, the
self-contained air-conditioning unit and the electrical box must
not be installed in the immediate vicinity of heat sources.
To Next Page
Loading...
Need help?
General
