Webasto S16-R-115V-REV-R410a User Manual

16 BlueCool S-Series
6.6 Installing the cabin temperature sen-
sor
The cabin temperature sensor is required to register the cabin
temperature.
To ensure trouble-free operation make sure the cabin temperature
sensor is positioned correctly.
Notes
■
Direct sunlight and other heat sources can impair
the operation of the system.
■
Do NOT install the cabin temperature sensor in the
immediate vicinity of a supply air grille.
Select an installation location which is free from external influen-
ces if possible. Among other things, the following external influ-
ences should be avoided:
■
Radiator
■
Kitchen cooker
■
Light sources
It is advisable to mount the cabin temperature sensor in the area
of the return flow, e.g. on the back of the air inlet grille.

Fit cabin temperature sensor in required location.

Connect the sensor cable to the electrical box from the outside.
6.7 Accessories
6.7.1 BlueCool Expert Tool
The BlueCool Expert Tool, which enables easy setting, actuation
and diagnostics, is available for the BlueCool S-Series. Please see
the corresponding documentation for additional information on
this subject.
Authorised users can download the software for this free of
charge from the Webasto dealer portal at:
https://dealers.webasto.com

Webasto S16-R-115V-REV-R410a Specifications

General

Brand	Webasto
Model	S16-R-115V-REV-R410a
Category	Marine Equipment
Language	English