Weber mt TRC 66 - Automatic Activation of Vibration; Individual Activation of Vibration

TRC66-86 *** 27
2.6.4 Automatic Activation of Vibration
Put the compactor into operation as described in
paragraph 2.5/2.6 Starting/Operation.
- Turn the switch (32/1) to the position.
- Turn the switch (32/2) to the "Auto" position.
- Push the levers (32/2) to the desired direction of
travel.
2.6.5 Individual Activation of Vibration
- Turn the switch ( 32/1) to the position as
described above.
- Turn the switch (32/2) from the "Auto" position to
the desired direction of travel.
When going downhill, the vibration should
always rotate in uphill direction. Thus, an
additional braking effect is achieved.
Figure 32
1
2
3