Weber mt TRC 66 - Page 34

TRC66-86 *** 34
Maintenance
Interval
Maintenance
Point
Maintenance
Work
Remarks
Every 500 operating
hours
Engine
Fan V-belt Replace 3.3.9
Valves Check the valve
clearance, adjust if
necessary
Manual of the
engine
manufacturer
Vibrator
Change the oil 3.3.7
Hydraulic system
Change the hydraulic
oil
3.3.6
Hydraulic system
Replace the hydraulic
oil filter
3.3.5
Every 1,000
operating hours
Cooling system
Change the coolant Manual of the
engine
manufacturer
Fuel system
Check the injection
nozzles
Manual of the
engine
manufacturer
Every 2,000
operating hours
Whole compactor
Check for visible
damage and wear
Remove dirt, old
grease and rust