TRC66-86 *** 54
Hydraulic Diagram
1 Diesel engine LDW 1003
2 Triple gear pump
3 Control block
3.1 Pressure relief valves
3.2 Directional control valve
3.3 Directional control valve
3.4 Pressure control valve
3.5 Non-return valves
3.6 Load control valve
3.7 Directional control valves
3.8 Change-over valve
4 Return line filter
5 Non-return valve
6 Oil/water cooler
7 Wheel hub motors with brake
8 Wheel hub motors
9Gear motor
10 Non-return valves
M1 Measuring point, vibration drive/propulsion/high-speed range 0 - 250 bar
M2 Measuring point, propulsion, high speed range 20 - 250 bar
M3 Propulsion 20 - 250 bar
M4 Measuring point, brake, 15 -20 bar
To Next Page
Loading...
