Weber Genesis 330 User Manual

16
REFILLING THE LIQUID PROPANE CYLINDER
We recommend that you refill the LP cylinder before it is completely empty. To refill, take
LP cylinder to a “Gas Propane” dealer.
Removal of the gas supply cylinder:
A) Shut off gas supply and disconnect hose and regulator assembly from the cylinder.
Follow one of the specific regulator connection instructions illustrated based on your
regulator type.
a) Unscrew regulator fitting from tank turning anticlockwise (1).
b) Unscrew regulator fitting from tank turning clockwise (2) (3).
c) Move regulator lever (4) to the down/off position. Push in on regulator lever until
it releases from tank (5).
d) Move regulator lever to the off position (6) (8). Slide the collar of the regulator
up (7) (9) to disconnect from tank.
B) Exchange empty cylinder for a full cylinder.
◆
RECONNECT THE LIQUID PROPANE CYLINDER
Refer to “CONNECTING THE LIQUID PROPANE CYLINDER.”
◆
GAS INSTRUcTIONS
1
2 3
4 5
6
7
2 3
8
9

Weber Genesis 330 Specifications

General

BTU Main Burners	38, 000
BTU Sear Burner	10, 000
BTU Side Burner	12, 000
Grate Material	Porcelain-enameled cast iron
Burner Material	Stainless Steel
Ignition	Electronic
Fuel Type	Propane
Burners	3
Warranty	10 years