Key Features
Products support IP camera supporting Onvif Profile-S or WESP. Products support real-time live monitoring,
real-time recording/playback, backup, push alarm and audio of connected IP camera.
Other DVR’s video channel can be treated as an IP camera and NVR supports all NVR functions to other DVR’s
video channel.
Also, it is possible to control NVR from other PC located in remote place such as Windows PC’s ‘remote
desktop’. (Remote DVR function)
Products can record video from max 5 seconds before event occurrence and record up to 30 fps per channel.
Supports IP camera
- Onvif Profile-S
- WESP
Remote DVR function
Supports Normal/Event Record, Schedule/Event Record, Emergency Record
Supports archiving event list (sensor, video loss, motion detection, Text, Flame detection)
Max 5 seconds pre-alarm recording per each channel
UHD (Ultra High Definition)
The max supporting resolution of IP camera is 4K UHD. Also, 4K UHD video output is supported.
PoE (Power over Ethernet)
The power can be supplied to IP camera using only ethernet cable (not required any other power cable). It is
highly recommended that shielded Ethernet cable must be used for PoE port.
Flame Detection
Flame detection camera (N1080BL-AF-F2) which is equipped with feature to detect flame can be connected
to NVR and it will notify manager of flame alarm quickly thoughout NVR, CMS and mobile phone.
Screen Output
Supports 4K UHD monitor output
Various Multi-division Screen Mode –1, 2, 4, 6, 9, 10, 13, 16, 25, 36, 64, Custom A/B/C
Auto Sequence, Event Pop-up
To Next Page
Loading...