Weidmüller IE-SW-VL08M Series User Manual

IE-SW-VL08M Series User’s Manual Featured Functions
3-2
Max.30
Characters
Use this to record contact information of the
person responsible for maintaining this
IE-SW-VL08M switch.
None
Web Configuration
Setting Description Factory Default
Disable / http or https /
https only
You can select disable, or accept both http and
https, or https only, from the web console
http or https
Web Auto-logout (s)
Setting Description Factory Default
60 to 86400 (seconds)
Disable or extend the auto-logout time for the
web management console.
0 (disable)
Age time (s)
Setting Description Factory Default
15 to 3825 (seconds)
The length of time that a MAC address entry
can remain in the Weidmueller switch. When
an entry reaches its aging time, it “ages out”
and is purged from the switch, effectively
cancelling frame forwarding to that specific
port.
300
Password
The Weidmueller switch provides two levels of access privileges: admin privilege gives read/write
access to all switch configuration parameters; user privilege provides read access only—you will be
able to view the configuration, but will not be able to make modifications.
ATTENTION
The IE-SW-VL08M’s default Password is set to “Detmold”.
If a Password is set, then you will be required to type the Password when logging into the RS-232
Console, Telnet Console, or Web Browser interface.

Weidmüller IE-SW-VL08M Series Specifications

General

Brand	Weidmüller
Model	IE-SW-VL08M Series
Category	Network Router
Language	English