IE-SW-VL08M Series User’s Manual Featured Functions
3-58
Configuring GMRP
GMRP is a MAC-based multicast management protocol, whereas IGMP is IP-based. GMRP
provides a mechanism that allows bridges and end stations to register or un-register Group
membership information dynamically.
GMRP enable
Setting Description Factory Default
Enable/Disable Select the option to enable the GMRP function for the
port listed in the Port column
Disable
GMRP Table
The IE-SW-VL08M displays the current active GMRP groups that were detected.
Setting Description
Fixed Ports This multicast address is defined by static multicast.
Learned Ports This multicast address is learned by GMRP.
Using Rate Limiting
A single device should not be allowed to occupy unlimited bandwidth, especially when the device
malfunctions. For example, broadcast storms could be caused by an incorrect topology or
malfunctioning device. The IE-SW-VL08M devices not only prevents broadcast storms, but can
also configure the ingress rate of unicast/multicast/broadcast packets, giving administrators full
control of the limited bandwidth, and preventing unpredictable faults before they occur.
To Next Page
Loading...
Need help?
General
