IE-SW-VL08M Series User’s Manual Featured Functions
3-8
Neighbor Cache
Setting Description Factory Default
None The information in the neighbor cache that
includes the neighboring node’s IPv6 address,
the corresponding Link-Layer address, and the
current state of the entry.
None
Time
The Time configuration page lets users set the time, date, and other settings. An explanation of each
setting is given below the figure.
The switch has a time calibration function based on information from an NTP server or user
specified Time and Date information. Functions such as Auto warning Email can add real-time
information to the message.
NOTE
The IE-SW-VL08M does not have a real time clock. The user must update the Current Time and
Current Date to set the initial time for the device after each reboot, especially when the network
does not have an Internet connection for NTP server or there is no NTP server on the LAN.
Current Time
Setting Description Factory Default
To Next Page
Loading...
