Weidmüller IE-SW-VL08M Series User Manual

IE-SW-VL08M Series User’s Manual Featured Functions
3-18
For SNMP V3, there are two levels of privilege for different accounts to access the IE-SW-VL08M.
Admin privilege allows access, and authorization to read and write the MIB file. User privilege only
allows reading the MIB file, but does not authorize writing.
Admin Auth. Type (for SNMP V1, V2c, V3, and V3 only)
Setting Description Factory Default
No-Auth
Use admin account to access objects.
No authentication
No
MD5-
Auth
Provide authentication based on the
HMAC-MD5 algorithms. 8-character
passwords are the minimum requirement
for authentication.
No
SHA-
Auth
Provide authentication based on the
HMAC-SHA algorithms. 8-character
passwords are the minimum requirement
for authentication.
No
Admin Data Encryption Key (for SNMP V1, V2c, V3, and V3 only)
Setting Description Factory Default
Enable
8-character data encryption key is the
minimum requirement for data encryption.
Maximum 30-character encryption key
No
Disable No data encryption No
User Auth. Type (for SNMP V1, V2c, V3 and V3 only)
Setting Description Factory Default
No-Auth
Use the admin or user account to access
objects. No authentication.
No
MD5-Auth
Provide authentication based on the
HMAC-MD5 algorithms. 8-character
passwords are the minimum requirement
for authentication.
No
SHA-Auth
Provide authentication based on the
HMAC-SHA algorithms. 8-character
passwords are the minimum requirement
for authentication.
No
User Data Encryption Key (for SNMP V1, V2c, V3 and V3 only)
Setting Description Factory Default
Enable
8-character data encryption key is the
minimum requirement for data encryption.
Maximum 30-character encryption key.
No
Disable No data encryption No

Weidmüller IE-SW-VL08M Series Specifications

General

Brand	Weidmüller
Model	IE-SW-VL08M Series
Category	Network Router
Language	English