WEIHONG NK300CX - 2 Basic Commissioning; Set Commissioning Parameters; Set Bus Control System

上海维宏电子科技股份有限公司
SHANGHAI WEIHONG ELECTRONIC TECHNOLOGY CO., LTD.
10 /33
2 Basic Commissioning
Through this section, you can quickly know the following basic commissioning
processes for Integrated CNC System for Shoe Molding Machines:
1. Set commissioning parameters.
2. Adjust the axis direction.
3. Return to the machine origin.
4. Define the workpiece origin.
2.1 Set Commissioning Parameters
The integrated CNC system supports both the bus control system and the non-bus
control system.
To set the type of control system, press → 1 → F4, modify the value of
parameter N50000 Control System Type.
2.1.1 Set the Bus Control System
This operation is used to set commissioning parameters for bus control system.
Before setting commissioning parameters for the bus control system, ensure the
following:
• Parameter N50000 Control System Type is set to 1.
• The used terminal board is Lambda 5M RJ45.
To set commissioning parameters for the bus control system, do the following:
1. To enter Param functional area, press .
2. To enter Axis Interface, press 2.
3. Find and set the following axis parameters:
– N11000 Encoder Feedback
– N11020 Axis Encoder Type
– N16000 Drive Station Address
– N16020 Encoder Digit
– N74100 Lead Screw Pitch
– N10010 Pulse Equivalent
– N16030/N16040 Electronic Gear Ratio
See Parameter List for details.