上海维宏电子科技股份有限公司
SHANGHAI WEIHONG ELECTRONIC TECHNOLOGY CO., LTD.
13 /33
To return to the machine origin with an incremental encoder, do the following:
1. In REF mode, to enter Coor interface, press → 1:
2. Press one of the following:
– F1: return X-axis to the machine origin.
– F2: return Y-axis to the machine origin.
– F3: return Z-axis to the machine origin.
– F5: return X-axis and Y-axis to the machine origin at the same time.
– F8: return all axes to the machine origin in order of Z-axis, X-axis and Y-
axis.
Note: The system entitles Z-axis the highest priority in returning to the machine origin by default.
For safety, it is suggested to firstly return Z-axis and then return X-axis and Y-axis at the same time.
After returning, the sign appears in front of related axes in the coordinate
display area.
To Next Page
Loading...
