上海维宏电子科技股份有限公司
SHANGHAI WEIHONG ELECTRONIC TECHNOLOGY CO., LTD.
22 /33
2. According to the actual situation, modify names of program files in the target
folder:
– If it is your first time to match the program files with technics, modify
the names according to the default matching principle.
– If you have modified the matching principle, modify the program file
names according to your customized matching rules.
The system will automatically match program files with technics according to
the program file names.If Some program files are not matched and their
corresponding technics names turns to number in Technic column:
3. Optional: To adjust the machining order of technics, select the target technic
and press F4 / F5.
4. Optional: If you need to modify the default setting of the target technic, do the
following:
1. Select the target technic and press F6.
2. Modify the following according the actual situation:
• To modify the matched technic name, press F1.
• To modify the matched name of program file, press F2.
To Next Page
Loading...
