Interface MODULE 31
8. Interface MODULE
8.1 Coupling/oxygen connection function
The Interface MODULE allows oxygen (2.7 – 6 bar)
to be tapped off or additional oxygen to be fed in
from an external supply.
The Interface MODULE serves as an interface - to the
central oxygen supply, for example. You can order it
with different quick-fit couplings depending on your
requirements.
The Interface MODULE has a pressure gauge of 0 -
10 bar to enable oxygen pressure to be monitored.
8.2 Operation
Making the connection
To tap off or feed in oxygen, plug the connector into
external oxygen connector
8. Push the connector far
enough in for it to latch automatically.
Releasing the connection
To release the connector again, push the release
collar towards the module.
Please note that this disconnection must be carried
out directly at oxygen connection
8.
To Next Page
Loading...
