Hygiene treatment 39
11. Hygiene treatment
The modules and the accessories used must be
subjected to a hygiene treatment after every use.
After that, you should always perform a function
check (see “12. Function check” on page 42).
11.1 Preparing the OMNIVAC secretion aspiration
system
Note When taking off and emptying aspirate bottles,
please ensure that the lid does not accidentally come
off an aspirate bottle and cause the contents to spill.
1. Take the tubes off the aspirate bottles and the
module.
2. Take the aspirate bottles out of the holder.
3. Take off the aspirate bottle lid.
4. Empty the aspirate bottles.
Comply with the relevant regulations on disposal
(see “3.1 Safety instructions” on page 8).
5. Remove the connectors and the ball from the
overflow cutout in the aspirate bottle lids.
To Next Page
Loading...
