Weinmann RESCUE-PACK Plus - Disassembling holding bracket; Disassemble LIFE-BASE light XS holding bracket; Disassemble LIFE-BASE 1 NG XS holding bracket

52 pages

Save Page as PDF

To Next Page

To Previous Page

WM 66531 2023-01

RESCUE-PACK Plus EN 27

6 Disassembly

6.3 Disassembling holding

bracket

6.3.1 Disassemble LIFE-

BASE light XS holding

bracket

6.3.2 Disassemble LIFE-

BASE 1NG XS holding

bracket

Main Page

Table of Contents2
Introduction5
About this Document5
Explanation of Warnings5
Safety6
Intended Purpose6
Safety Information6
Use Approved Medical Devices and Recommended Other Parts6
Do Not Modify the Design of the Emergency Backpack and Other Parts7
Subject the Emergency Backpack to Hygienic Reprocessing7
Description8
Overview8
Holding Brackets11
Accessories Bags12
Charging Adapter13
Labeling14
Function Check16
Intervals16
Performing a Visual Inspection16
Checking Emergency Backpack16
Checking Charging Interface17
Checking Lock on LIFE-BASE 1NG XS17
Preparation and Operation19
Fitting out Emergency Backpack19
Secure CO Detector19
Fill Accessories Bags and Transparent Compartments19
Stow Breathing Circuit19
Attach RFID Card, NFC Card, and Customized Labeling19
Adjusting Shoulder Straps20
Stow Shoulder Straps20
Remove Shoulder Straps20
Connecting Emergency Backpack to the Power Supply20
Securing Device in the Emergency Backpack20
Secure Device to LIFE-BASE Light XS in the Emergency Backpack20
Secure Device to LIFE-BASE 1NG XS in the Emergency Backpack21
Removing Device from Emergency Backpack22
Remove Device on LIFE-BASE Light XS from Emergency Backpack22
Remove Device on LIFE-BASE 1NG XS from Emergency Backpack22
Operating Device in the Emergency Backpack23
Lowering Emergency Backpack on a Rope24
Using Tension Belt with Magnetic Fastener25
Disassembly26
Removing Accessories Bags26
Removing Oxygen Cylinder and Tension Belts26
Disassembling Holding Bracket27
Disassemble LIFE-BASE Light XS Holding Bracket27
Disassemble LIFE-BASE 1NG XS Holding Bracket27
Disassembling Charging Interface from LIFE-BASE 1NG XS28
Disassembling Charging Interface Port28
Removing Shoulder Straps29
Removing Backpack Padding and Backpack Reinforcement29
Hygienic Reprocessing30
Intervals30
Preparing for Hygienic Reprocessing30
Cleaning Parts Manually31
Disinfecting Parts by Wiping32
Reprocessing Parts Mechanically33
Preparing Parts for Reuse34
Cleaning and Disinfection Plan35
Assembly36
Inserting Backpack Padding and Backpack Reinforcement36
Attaching Shoulder Straps37
Fitting Charging Interface Port37
Fitting Charging Interface to LIFE-BASE 1NG XS38
Fitting Holding Bracket38
Fit LIFE-BASE 1NG XS Holding Bracket38
Fit LIFE-BASE Light XS Holding Bracket39
Securing Oxygen Cylinder and Tension Belts39
Securing Accessories Bags40
Faults41
Maintenance43
Storage and Transport44
Proper Disposal45
Emergency Backpack and Accessories Bags45
Electronic Waste45
Contaminated Parts45
Scope of Supply46
Version Supplied (Example)46
Other Parts46
Technical Data49
Warranty50

Weinmann RESCUE-PACK Plus - Disassembling holding bracket; Disassemble LIFE-BASE light XS holding bracket; Disassemble LIFE-BASE 1 NG XS holding bracket

Table of Contents

Related product manuals