Weinmann RESCUE-PACK Plus - Assembly; Inserting backpack padding and backpack reinforcement

36 EN RESCUE-PACK Plus
WM 66531 2023-01
8 Assembly
8 Assembly
This chapter explains the following:
• Assembly of all affected parts of the
emergency backpack following
complete hygienic reprocessing.
• Assembly of individual parts of the
emergency backpack in order to replace
the parts, e.g., in the case of wear or
defect.
8.1 Inserting backpack
padding and backpack
reinforcement
If the backpack padding and backpack
reinforcement prove difficult to insert: Turn
the upper section of the backpack body
inside out.
1
2
3