WM 66531 2023-01
RESCUE-PACK Plus EN 3
Table of contents
5.4 Securing device in the emergency backpack ................................. 20
5.4.1 Secure device to LIFE-BASE light XS in the emergency backpack .............. 20
5.4.2 Secure device to LIFE-BASE 1NG XS in the emergency backpack .............. 21
5.5 Removing device from emergency backpack ................................. 22
5.5.1 Remove device on LIFE-BASE light XS from emergency backpack ............. 22
5.5.2 Remove device on LIFE-BASE 1NG XS from emergency backpack ............. 22
5.6 Operating device in the emergency backpack ............................... 23
5.7 Lowering emergency backpack on a rope ..................................... 24
5.8 Using tension belt with magnetic fastener .................................... 25
6 Disassembly 26
6.1 Removing accessories bags .......................................................... 26
6.2 Removing oxygen cylinder and tension belts ................................ 26
6.3 Disassembling holding bracket ..................................................... 27
6.3.1 Disassemble LIFE-BASE light XS holding bracket ...................................... 27
6.3.2 Disassemble LIFE-BASE 1NG XS holding bracket ...................................... 27
6.4 Disassembling charging interface from LIFE-BASE 1NG XS ............ 28
6.5 Disassembling charging interface port .......................................... 28
6.6 Removing shoulder straps ............................................................ 29
6.7 Removing backpack padding and backpack reinforcement ........... 29
7 Hygienic reprocessing 30
7.1 Intervals ...................................................................................... 30
7.2 Preparing for hygienic reprocessing .............................................. 30
7.3 Cleaning parts manually .............................................................. 31
7.4 Disinfecting parts by wiping ......................................................... 32
7.5 Reprocessing parts mechanically .................................................. 33
7.6 Preparing parts for reuse ............................................................. 34
7.7 Cleaning and disinfection plan ..................................................... 35
8 Assembly 36
8.1 Inserting backpack padding and backpack reinforcement ............. 36
8.2 Attaching shoulder straps ............................................................ 37
8.3 Fitting charging interface port ...................................................... 37
8.4 Fitting charging interface to LIFE-BASE 1NG XS ........................... 38
To Next Page
Loading...
